33kv 1250kVA Three Phase Power Distribution Compact Transformer Substation
Outdoor prefabricated transformer substation. EU or US style. 12kV, 15kV, 24kV, 36kV. Available.
HV RMU equiped, LV can be optional with reactive power compensator or with Harmonic wave filtering.
Outdoor prefabricated transformer substation(Combined Transformer)
Intelligent box substation
The prefabricated-box substation is one of the most economic, convenient, effective and new distribution equipments. It assembles 12kV(15kV, 24kV, 36kV is available)high-voltage switch cabinet; Transformer and low-voltage switch cabinet together, and is movable, assembled in plant.
The prefabricated box substation (Named Box Substation below) has many advantages, such as: Completely whole set, small cubage, little area, ingoing load center, improving the power supply quality, reducing the circuit loss, shorten power delivery period, flexible location, adapt to setting, convenient assembly, reliable operation, small investment, rapid effect, and so on. Its widely used in urban republic power distribution, high rise building, residential areas, parks, and high-speed roads, as well as oil fields, industrial and mining enterprises, temporary construction areas. The product accords to the GB/T17467-1998<>, DL/T537-1993<<6-35KV box substation ordering technology standards>>, and other standards.
a) Air temperature:Maximum temperature:+50ºC; Minimum temperature:-55ºC
b) Humidity: Monthly average humidity 95%; Daily average humidity 90%
c) Altitude above sea level: Maximum installation altitude: 2500m
d) Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
e) No frequent violent shake
Main technical specifications
Less than 4000
Crust Protection Grade
Oil type 55; dry type 65
According to primacy wiring circuit schema
Main Designation Characteristics
a) The crust of the substation is designed according to the foreign advanced technology and physical reality. We provide many kinds of crust material such as aluminum alloy steel composite stainless steel board and non metal material(glass fiber).
b) The HV side use charge switch or vacuum circuit breaker. The transformer could be oil type hermetically-sealed type and dry type.
c) The proof of the box is double layers structure and between the layers is filled with foam.There are independent boards in HV and LV room, and in the transformer room will install auto thermal controller heater and cooling equipment.
Note: we offer special customized products according to client's requirement.